Discussion de forum
Résolu
Velop Mesh wifi compatability with Helix
I am currently using Linksys Velop Mesh (3 atennas) with my current system. If I go to Helix is my sytem still compatible? I have a very large coverage. THx
Hi !
I have an Orbi mesh.
If I put the Helix Gateway to Bridge Mode, will the Helix TV Terminal still access the Gateway?
What if I connect the Helix TV Terminal to my Orbi Mesh instead...that would work?
And how would I go about changing the network on my Helix TV Terminal to my Orbi Mesh?
Hello mcicc!
If the Heilx Gateway is in Bridge mode, Helix TV terminals will no longer access the Gateway's Wi-Fi. Instead, it will be necessary to manually connect them to your own router's Wi-Fi.
Any router-type device that has the capacity to provide a Wi-Fi network and an IP Adress (which means it can act as a DHCP server) should work.
Here is the procedure to manually connect a Helix TV terminal to a specific Wi-Fi network :
1. Press and hold the "Exit" button on the remote for 5 seconds
2. Press the "Down" arrow twice
3. Enter the following digits : 9, 4, 3, 4
4. Select the desired Wi-Fi Network and press OK/Select (round button in the middle of the remote)
5. Enter the Password and confirm
6. The Helix TV terminal should connect to the Wi-Fi network.
If you need further assistance, do not hesitate to contact our Technical Service by phone or online chat. You will find our contact info at the following page : http://www.videotron.com/residential/contact-us
Have a great evening!
