Room Switch

I can't believe that no one from Videotron has answered you yet...

Anyway, moving your Helix comes with a set of problems. The signal needs to be in a certain range on Helix (input from Cable) and with low interference in order to work. This means that switching to a new port you run the risk of not getting service if the signal isn't within the expected range. A tech verifies this when they install your Helix butr they do not check the other ports. Also, splitters (the cheap ones especially) can actually trim some frequencies. That was not so much of a problem when the analog cable was rampant but with digital signals and the very high frequencies used now, it is much more of an issue.

You can check where you signal is split and see if you can replace the splitter with a better, more recent one but there is no guarantee that it will work or work reliably. Only a tech with the right meter will be able to make sure you get the proper signal at a new port.