Discussion de forum
Samsung 4k PVR loses signal if we open it before the TV
I just upgraded to the Samsung 4k receiver and I'm encountering an issue that requires me to reboot it very often. With the previous basic receiver, I would leave it on at all times. I would open...
The only work around is that I do not leave the 4k receiver ON for long amounts of time. I turn the receive OFF at night and when I turn it back on, I make sure the TV is already ON and giving me the "no video feed" message. At that point the connection between the TV and the cable box is "solid" and I can change inputs to the xbox/ps4 and switch back to the cable box input without losing the image or sound.
Doing it any other way requires a reboot of the cable box.
I have the same problem with my new 4K receiver and brand new 4k tv. I am uusing the hdmi cable that came with the receiver.
I have to unplug the recever and reboot it after a tv shutdown.
Did you find a solution
The only work around is that I do not leave the 4k receiver ON for long amounts of time. I turn the receive OFF at night and when I turn it back on, I make sure the TV is already ON and giving me the "no video feed" message. At that point the connection between the TV and the cable box is "solid" and I can change inputs to the xbox/ps4 and switch back to the cable box input without losing the image or sound.
Doing it any other way requires a reboot of the cable box.
I have played with it a lot the past day. I have found that if I put the settings on the PVR at 1080I, that solves the problem. If I put 1080P, I loose the sound when turning back on the TV.
Never gets a shutdown on 1080I
This is a bad glitch for Videotron with 4K receiver
I had the same problems... I was using my previously installed HDMI cable. I switched to the HDMI cable provided and I have steady UHD 4K resolution without any hiccups (terminal hooked on ethernet).
