Profil de l'utilisateur
merlin
Initiate
Inscrit le il y a 6 ans
Widgets de l'utilisateur
Contributions
Re: Port forwarding glitch
After many tests ..... Yes, incoming port 80 CAN BE UNLOCKED. Here are the parameters to change with the Zyxel EMG2926: 1 - The firewall must be activated. (For NAT and the default server to work properly) 2 - All WPS must be disabled. (To disable the Upnp) 3 - The Upnp must be deactivated. 4 - In the 'DHCP Server' tab, you must reserve the server's local address. 5 - Under the 'NAT' tab, change the IP address of the default server for the server's local address. 6 - Under the tab 'firewall' = You must disable teardrop filtering. 7 - In the 'Content filter' tab, add the IP address of the local server as a recognized computer. 8 - In the tab 'Remote management' enable only from local network, and change the ports 443 and 80 to, for example, 50443 and 5080. The router would then be accessible at 192.168.0.1:5080 . Perhaps a reboot of the router will then be necessary, depending of the order in which these settings are applied. And there you go. Incoming port 80 open ! And several others also... Happy coding !!
