2 trucs me tracasse. Les frais de deplacement d'un technicien pour un IP fix et PFSense en IP Dynami

J'utilise le helix en bridge mode, pfsense 2.6 et ipv6/ipv4. Absolument aucun problème.

 <wan>
<if>igb3</if>
<blockpriv></blockpriv>
<blockbogons></blockbogons>
<descr><![CDATA[WAN]]></descr>
<alias-address></alias-address>
<alias-subnet>32</alias-subnet>
<spoofmac></spoofmac>
<enable></enable>
<ipaddr>dhcp</ipaddr>
<dhcphostname></dhcphostname>
<dhcprejectfrom></dhcprejectfrom>
<adv_dhcp_pt_timeout></adv_dhcp_pt_timeout>
<adv_dhcp_pt_retry></adv_dhcp_pt_retry>
<adv_dhcp_pt_select_timeout></adv_dhcp_pt_select_timeout>
<adv_dhcp_pt_reboot></adv_dhcp_pt_reboot>
<adv_dhcp_pt_backoff_cutoff></adv_dhcp_pt_backoff_cutoff>
<adv_dhcp_pt_initial_interval></adv_dhcp_pt_initial_interval>
<adv_dhcp_pt_values>SavedCfg</adv_dhcp_pt_values>
<adv_dhcp_send_options></adv_dhcp_send_options>
<adv_dhcp_request_options></adv_dhcp_request_options>
<adv_dhcp_required_options></adv_dhcp_required_options>
<adv_dhcp_option_modifiers></adv_dhcp_option_modifiers>
<adv_dhcp_config_advanced></adv_dhcp_config_advanced>
<adv_dhcp_config_file_override></adv_dhcp_config_file_override>
<adv_dhcp_config_file_override_path></adv_dhcp_config_file_override_path>
<ipaddrv6>dhcp6</ipaddrv6>
<dhcp6-duid></dhcp6-duid>
<dhcp6-ia-**blip**-len>8</dhcp6-ia-**blip**-len>
<adv_dhcp6_prefix_selected_interface>lan</adv_dhcp6_prefix_selected_interface>
</wan>
<lan>
<enable></enable>
<if>igb1.100</if> remplacé par le nom de ton interface(aka nic driver) et enlevé .100 si aucun vlan
<ipaddr>192.168.1.1</ipaddr> 
<subnet>24</subnet>
<ipaddrv6>track6</ipaddrv6>
<subnetv6>64</subnetv6>
<media></media>
<mediaopt></mediaopt>
<track6-interface>wan</track6-interface>
<track6-prefix-id>0</track6-prefix-id>
<descr><![CDATA[LAN]]></descr>
</lan>

DHCP

<lan>
<enable></enable>
<range>
<from>192.168.1.10</from>
<to>192.168.1.245</to>
</range>
<dhcpleaseinlocaltime>yes</dhcpleaseinlocaltime>
<failover_peerip></failover_peerip>
<defaultleasetime>28800</defaultleasetime>
<maxleasetime></maxleasetime>
<netmask></netmask>
<gateway></gateway>
<domain></domain>
<domainsearchlist></domainsearchlist>
<ddnsdomain></ddnsdomain>
<ddnsdomainprimary></ddnsdomainprimary>
<ddnsdomainsecondary></ddnsdomainsecondary>
<ddnsdomainkeyname></ddnsdomainkeyname>
<ddnsdomainkeyalgorithm>hmac-md5</ddnsdomainkeyalgorithm>
<ddnsdomainkey></ddnsdomainkey>
<mac_allow></mac_allow>
<mac_deny></mac_deny>
<ddnsclientupdates>allow</ddnsclientupdates>
<tftp></tftp>
<ldap></ldap>
<nextserver></nextserver>
<filename></filename>
<filename32></filename32>
<filename64></filename64>
<filename32arm></filename32arm>
<filename64arm></filename64arm>
<uefihttpboot></uefihttpboot>
<rootpath></rootpath>
<numberoptions></numberoptions>
<dnsserver>XXXXXXXXXXX</dnsserver>probablement 192.168.1.1 dans ton cas
</lan>

DHVPv6
<dhcpdv6>
<lan>
<enable></enable>
<range>
<from>::1000</from>
<to>::2000</to>
</range>
<ramode>managed</ramode>
<rapriority>medium</rapriority>
<prefixrange>
<from></from>
<to></to>
<prefixlength>64</prefixlength>
</prefixrange>
<defaultleasetime>28800</defaultleasetime>
<maxleasetime></maxleasetime>
<netmask></netmask>
<dhcp6c-dns>disabled</dhcp6c-dns>
<domain></domain>
<domainsearchlist></domainsearchlist>
<ddnsdomain></ddnsdomain>
<ddnsdomainprimary></ddnsdomainprimary>
<ddnsdomainsecondary></ddnsdomainsecondary>
<ddnsdomainkeyname></ddnsdomainkeyname>
<ddnsdomainkeyalgorithm>hmac-md5</ddnsdomainkeyalgorithm>
<ddnsdomainkey></ddnsdomainkey>
<ddnsclientupdates>allow</ddnsclientupdates>
<tftp></tftp>
<ldap></ldap>
<bootfile_url></bootfile_url>
<dhcpv6leaseinlocaltime>yes</dhcpv6leaseinlocaltime>
<numberoptions></numberoptions>
<rainterface></rainterface>
<ravalidlifetime></ravalidlifetime>
<rapreferredlifetime></rapreferredlifetime>
<raminrtradvinterval></raminrtradvinterval>
<ramaxrtradvinterval></ramaxrtradvinterval>
<raadvdefaultlifetime></raadvdefaultlifetime>
<radomainsearchlist></radomainsearchlist>
<radvd-dns>enabled</radvd-dns>
<radnsserver>xxxxxx</radnsserver> automatiquement généré
<dnsserver>xxxxx</dnsserver> automomatiquement généré
</lan>
</dhcpdv6>

P.S. il est essentiel d'utilisé ipv6 à des fins de performance. Grace à des technologies comme le PathMTU (le client est responsable de géré sont MTU de manière dynamique avec les réponses de ''packet too big'' des serveurs IPV6. C'est aussi pour cette raison que sur l'interface WAN, il faut absolument laissé passé le ICMPv6 vers l'ensemble des zones utilisant le IPV6.